All owners of laptops and computers sooner or later decide to clean the keyboard, because dust constantly accumulates on it, dirt gets on it and it happens that the buttons are simply accidentally flooded with something.
Most owners of smart technology have a question about how to quickly clean the keyboard so as not to harm the technology and increase its service life.
Methods and tools for cleaning the keyboard at home
To clean the keyboard, it is better to use the products intended for this purpose. They are available from specialized computer stores. You can purchase a cleaning kit that includes a specialized liquid, a brush and a napkin.
The store sells special wipes, keyboard fluid, and small brushes.
A napkin is used to clean the buttons on the keyboard from various surface dirt, with a brush you can remove dust and dirt between the buttons. Using these items, you can quickly clean the buttons without disassembling the keyboard.
In addition to special preparations, other means are widely used, but their use must be done with great care.
You can take isopropyl alcohol diluted in a little water and wipe the keys, this method will allow you to easily get rid of stubborn dirt.
When wiping the keyboard, care must be taken to ensure that diluted alcohol does not get on the button contacts. You cannot use ordinary alcohol for these purposes, it can wipe off all the paint from the buttons.
Instead of a special keyboard brush, you can use a regular brush with soft, long bristles. The cloth can be replaced with a nonwoven cloth. The buttons should be wiped with soapy water as often as possible, and then wiped dry so that no moisture remains.
What can a dirty keyboard cause?
Cleansing keyboard dirt helps improve keyboard performance appearance and prevent the occurrence of possible malfunctions, such as:
- sticky or jammed buttons on the keyboard;
- the laptop may break due to contamination of the buttons;
- due to dust and dirt, there is a possibility of malfunction of the unit.
The keyboard must be promptly cleaned from the appeared dirt, otherwise it may break.
In a regular computer, it can be replaced with a new one without any problems. In a laptop it is not so easy, and if it breaks down, then some problems may arise with its replacement and the cost of work will be corresponding. It is for these reasons that regular cleaning of the keyboard from dust is necessary.
Surface cleaning of the computer keyboard
Any cleaning must be done very carefully so as not to damage the keyboard. If you regularly clean the keys superficially, then in some cases you can do without deep cleaning.
Surface cleaning should be done at least once a month in order to remove the dust and all kinds of dirt that have appeared. The computer keyboard should be turned over and shaken thoroughly, some debris will fall out of the keys. Using a brush, you need to walk between the buttons and remove stuck debris from there.
To remove dirt from hard-to-reach places, you can use a special small keyboard vacuum cleaner or a can of air (compressed), which can be purchased at computer stores.
To clean the buttons from adhering dirt and grease, you can wipe them with napkins or a rag. Care must be taken to ensure that no liquid gets inside the buttons.
To clean the laptop keyboard, first of all, you must disconnect it from the power supply and use a compressed air cylinder to clean the buttons. After that, the surface of the keys must be wiped with a special napkin and wiped dry with a cloth.
If there are no wipes, you can moisten a rag with soapy water and thoroughly clean the surface of the buttons.
If necessary, you can remove the keys using a small screwdriver. The buttons are carefully wiped and replaced, in which case you need to know their location.
Deep cleaning of the keyboard when heavily soiled
Superficial cleaning is desirable at least once a month, and deep cleaning once every three months. When the keyboard is superficially cleaned from dust, and the buttons are still poorly pressed or sticky, you will have to wash the keyboard, having previously disassembled it.
For deep cleaning, you need to remove the keyboard, but this must be done with special care, otherwise you may damage any parts and it may fail.
After the keyboard is disassembled, the keys can be washed in warm soapy water, the contacts and the base of the keyboard just need to be cleaned with a soft bristle brush. If the contamination is strong, then you can wipe the contacts with a napkin slightly moistened with soapy water or a solution for cleaning the keyboard. Next, all contacts must be wiped dry so that no moisture remains.
After the cleansing procedure is completed, you must leave the base and buttons until completely dry. Once completely dry, the keyboard can be reassembled.
If, after deep cleaning, some keys do not work well or do not react at all, then repeated cleaning is pointless, this means that there is some kind of malfunction and the keyboard needs to be replaced or the laptop should be sent for repair.
Cleaning the keyboard after a liquid spill
Cleaning a flooded keyboard is quite common, especially among people who prefer to eat in front of the monitor. If this problem is not eliminated in time, the unit may fail. According to statistics, every third computer that broke down and entered the workshop was filled with some kind of liquid.
In the event that liquid has been spilled onto the keyboard, the following actions should be taken as soon as possible:
- With the first body, you need to disconnect the equipment from the power supply, otherwise a short circuit may occur.
- Next, you need to turn the keyboard or laptop over and wait a little until all the liquid flows out of there.
- The remaining moisture must be removed with cotton wool and dried with a hairdryer, setting it to the cold air supply at the highest power.
If there was a large enough amount of spilled liquid, then it is necessary to proceed to disassemble the keyboard or detach the buttons... When the keys are removed, wipe the keyboard surface with alcohol (isopropyl alcohol), then wipe it dry with a cloth or sponge.
In some cases, it will be necessary to change the membranes (protective). If spilled liquid leaves behind sticky streaks or stains, then these areas must be cleaned with a special cleaning agent.
After carrying out all the procedures for cleaning the keyboard from spilled drinks, it must be thoroughly dried, connected to the network and checked for operability.
Disassembly and assembly of the keyboard
Many PC users do not know how to disassemble and clean the keyboard, this issue must be approached with all seriousness in order to eliminate problems that arise due to the loss of a button or its mechanism:
- Before you start disassembling the keyboard, you need to disconnect it from the PC and take a photo of the location of the keys. This is done so that after cleaning it can be assembled with the correct installation of each button. It is advisable to parse it on a hard surface.
- The keyboard must be turned over and, starting from the center, unscrew all the bolts using a screwdriver (Phillips). All parts must be put in one place so that they are not lost. Then you can separate the body parts from each other.
- If you plan to disconnect the keys, then this is done with a thin screwdriver, picking them up from one side and disconnecting them from the top of the keyboard. The key starts to rise slightly and pops out of the retainer. Larger buttons will be a little more difficult to pull out as they have an additional metal retainer.
- On the bottom of the keyboard there is a thin film with contacts, it is strictly forbidden to touch it.
- After the keyboard is cleaned, it needs to be reassembled, for this both parts need to be connected and press a little to make a click. Next, you need to put each key in place, guided by a previously taken photo. After collecting the buttons, you need to tighten the bolts on the bottom of the keyboard. It is necessary to start twisting from the edges so that the keyboard does not move.
With a laptop, everything is not so simple as with a regular PC, where you can easily purchase a new keyboard if necessary.
- The first step is to disconnect the laptop from the power supply and remove the battery from it. Each key has an individual mount, which is desirable to put aside together with the button itself.
- It is advisable to start parsing with letters, the button is pryed off with a screwdriver, under it there is a mount, which must be very carefully snapped off, starting from the top, so as not to damage it. The side parts of the mounts are very fragile and must be removed with extreme care so as not to break the latches.
- After the buttons with letters are detached, you can proceed to detach other keys.... Some of them will have white mounts.
- After disconnecting all the keys, it is necessary to remove the stencil, on which there are special triangles corresponding to the buttons. Under the rubber base, there is a thin film, which must be handled with extreme care, it can easily break.
- Assembling the laptop keyboard is the same as parsing it.
Features of cleaning laptop keyboard
If the owner of the laptop does not have the skills to disassemble and assemble the keyboard, then it is better to give the device to the master. If the unit is under warranty service, then it is strictly forbidden to disassemble it.
If you do not have skills in disassembly, then it is better to do a surface cleaning. You can also remove some heavily soiled keys and clean them.
If such cleaning does not bring results, then you need to give the laptop to the master or do everything yourself, after taking a photo of the location of the keys and remembering the parsing sequence.
Each laptop model has its own individual location and you need to take this into account when parsing.
Modern tools and devices for cleaning the keyboard
You can purchase special cleaning products from computer stores to clean the keys.
There are special liquids and wipes on sale for cleaning the keyboard from dirt. Silicone cloths (slimes) are also widely used, which, due to their sticky properties, collect all the dust and dirt that is present.
Apply it several times until the stickiness is completely gone. You can use a small keyboard vacuum cleaner that sucks out all the dirt from the buttons. In addition to cleaning the keyboard, cleaning the cooler is necessary. , can be found here.
Precautionary measures
When cleaning the keyboard, you need to disconnect it from the PC or disconnect the laptop from the mains to avoid a short circuit. After cleaning, you must definitely wait until all buttons and other mechanisms that have been cleaned are dry.
When disassembling a laptop, you need to be very careful with the film and fastening the buttons, otherwise the film can be torn and the fasteners broken.
To prolong the life cycle of your laptop or PC, it is recommended to regularly clean the keyboard from dust and dirt. Surface cleaning is quick and quick.
If, after a quick cleaning, the keys continue to stick, then you need to deep clean. If you have any doubts about the possibilities of assembling and disassembling the laptop, it is recommended to take it to a workshop in order to exclude damage to any parts.
The computer keyboard is one of the most stressed parts of the computer. In the modern rhythm of life, users spend a lot of time at the computer: they eat, work, sometimes even sleep. And, naturally, a lot of rubbish accumulates in the keyboard over time; it is dust, crumbs. The longer the keyboard is left unclean, the more dirt collects both on the keys themselves and in the space below and between them.
The liquid spilled on the keyboard is a whole story. If, with gradual contamination, there is time to search the Internet and learn how to properly clean a computer keyboard at home, then in the event that tea or coffee is spilled on the keyboard, you must act quickly, otherwise the keyboard cannot be saved without delay.
First of all, to clean the computer keyboard at home, disconnect it from the network, if it is a wireless keyboard, then it is enough to remove the batteries from it.
Conditionally, cleaning can be divided into three types: it is easy - superficial cleaning, cleaning of medium complexity, and full cleaning.
Easy cleaning
When people are not eating at the computer, there are no animals in the room, from which small fibers collect in the space under the keys. And the cleaning of the computer keyboard is carried out regularly, in this case, in fact, it is not necessary to disassemble the keyboard (provided, of course, that it works properly). Let's figure out what we need for cleaning.
For such cleaning, it is enough to arm yourself with a specially cleansing cloth for a computer, or a damp cloth, ear sticks, a vacuum cleaner, a hairdryer, and a can of compressed air.
1. To clean the keyboard at home with a hair dryer, you need to blow out all dust and crumbs from the keyboard in the cold air mode as much as possible. If you have a compressed air cylinder, it is more convenient to use it.
2. Use a vacuum cleaner to collect everything that could not be removed with a hair dryer, then wipe the surface of the keys with a damp cloth.
3. In hard-to-reach places in the corners of the keys, ear sticks moistened with alcohol can remove the plaque of fat deposits from the hands, which inevitably appears over time with active work at the computer.
In case of slight contamination, it is not necessary to use any additional means, surface cleaning is sufficient without disassembling it.
Cleaning with partial disassembly of the keyboard
How to clean the keyboard if it is heavily soiled, if the cleaning of the computer keyboard has not been carried out for a long time, and the keyboard itself on the computer is regularly bombarded with crumbs from sandwiches, cookies, ash from cigarettes, and particles of animal lint? In this case, you need to partially disassemble the computer keyboard.
1. As in the first case, any cleaning should be started no earlier than the keyboard is completely de-energized.
2.Using a nail file, a table knife or a screwdriver, you need to pry off the key from one edge, it should come off its socket with a characteristic clicking sound, you do not need to exert much effort, the keys, in principle, should be easily removed.
3. Before dismantling the keys, you should find a photo with your keyboard on the network, or take a photo with a camera or phone, so as not to get confused during assembly where to insert which keys.
4. The keys themselves should be washed: how, and with what detergent - it doesn't matter. Just before using, make sure that the cleaning agent does not harm the stability of the paint on one key, so as not to accidentally wash off all the characters.
5. After all the keys have been removed, washed and dried while waiting for assembly, we will start cleaning the platform itself, here it is the same, it all depends on the amount of contamination.
You can use a vacuum cleaner, ear sticks, cotton pads, alcohol. It is necessary to thoroughly clean the entire surface of the plastic container with key mounts from dirt. Then we proceed to the assembly, referring to the photo of the keyboard, return the keys to their place, installing them in place, you should hear a characteristic click, signaling that the key is installed correctly.
7. Some keys have stabilizing springs, you need to carefully install these keys so that the bent edges of these springs fall into special grooves, these springs do not allow large keys such as space or Enter to bend. And when you click on them anywhere, they work evenly.
Full keyboard cleaning
Many users have spilled drinks on the keyboard. How can you work without your favorite cup of tea, or play your favorite toy without beer? With awkward or sudden movements, the contents, until the moment tasty or healthy, the drink appears on the keyboard.
Not much pleasant, but everything can be fixed, and it's quite easy, you only have to use at least a day or the on-screen keyboard, or connect another, spare, if anyone has one.
How to clean your computer keyboard for tough dirt or spilled liquids.
1. Disconnect the keyboard from the network.
2. Unscrew all the screws on the back cover; depending on the modification, there may be a different number of them.
3. The keys still need to be removed, how to do this is described in detail in the previous paragraph, so there is no point in rewriting the same steps.
4. Using a plastic card or plectrum, if available, unclip all retaining clips around the perimeter of the case and remove the back and front keyboard covers.
5. Disconnect the bornier before cleaning the keyboard. If a liquid is spilled, you need to remove moisture with a swab dipped in distilled water from the contact board, then wipe it with alcohol, since to remove moisture, all layers must be separated, but not broken, and they cannot be folded until completely dry, you can dry the board by hanging it on a clothesline ...
6. Inspect for damage or darkening on the film, this may indicate a broken contact, as a result of which some keys will not work.
7. Collect all parts of the keyboard not earlier than complete drying.
How to wash the keyboard
Sometimes it happens that the keyboard has to be washed, in the truest sense of the word. Not separately and in parts, but almost entirely. This applies to non-separable computer keyboards, where when you remove the back cover and the top panel with buttons, it turns out that the contact board is enclosed on both sides in a protective casing consisting of two metal plates riveted around the perimeter at high temperature with plastic clips.
They took off everything that can be removed and everything, then, either break it down to get to the board or wash it entirely. Ideally, this should be done in distilled water, but in my practice, after a substantial portion of sweet coffee on such a keyboard, when distilled water was not at hand, it actually had to be washed in a bowl with detergent, and then rinsed for a long time in running water ... But such an impromptu does not happen often, luckily, and on average I clean the keyboard once every six months, disassembling it completely and weekly from above with a damp cloth and a vacuum cleaner.
After such a shower, you need to dry a non-separable keyboard for at least 3 days in a warm place. Then it will not be difficult to assemble and connect the keyboard, as described above.
No matter how carefully you work with electronics, you cannot get away from the manifestations of human nature: someone sins with food near a laptop, someone loves to drink aromatic coffee and eat crispy friable cookies. Therefore, how not to observe computer hygiene, after a short time the question will certainly arise: how to clean a laptop keyboard at home?
Why clean and wipe your laptop?
Any device, be it asus, hp, lenovo, acer, which operates on electricity, attracts dust, such is the nature of electromagnetism, and if the device is also equipped with a forced ventilation system, then dust and dirt will collect inside like bees in a hive. Just such a device is a laptop.
Care and prevention in relation to a laptop comes down to timely and correct disposal of dust and stains. This is necessary not only to maintain a neat appearance, but also, most importantly, for the normal performance of the device and extending its service life.
Important! If your PC is a few years old and you need it for work or powerful games, you may need ours, made up of the latest release models.
What can a dirty laptop keyboard cause?
If dust and dirt gets inside the keyboard of a regular computer, then the only harm they can do is ruin the keyboard itself. But when dirt and dust from the laptop keyboard gets on its "filling", then the following troubles await you:
- Due to the ingress of mechanical debris inside, one or more buttons may sink.
- Failure of all keys can occur if you accidentally tipped a glass of liquid onto the surface.
- Breakage of internal parts of the laptop can also occur due to moisture getting inside;
- The laptop shuts down due to overheating - this can happen if dust and dirt gets on the heatsink. As a result, the ventilation system stops letting in air.
Considering all these factors, it is necessary for each owner to know how to clean a laptop keyboard and regularly do it on their own, if there is no time to take the device to specialists.
Important! Do not forget to keep an eye on the cleanliness of the system itself. Solve both problems at the same time by choosing a more suitable option from the ones we have proposed in a separate article.
How do I clean my laptop keyboard?
First, figure out which cleaning you need - shallow or deep:
- Surface cleaning cleans up the keys as well as the spaces between them.
- A deep cleaning will help remove dust from the contacts so that it does not settle on the inside of your laptop.
Important! The keyboard of the device needs two types of cleaning, but the more often you do surface cleaning, the less often you will have to resort to deep cleaning. Consider also the fact that not all models can simply remove the buttons. In some laptops and netbooks, they are a single design with a panel. Therefore, if you have just such a technique, then you will have to almost completely disassemble the device for deep cleaning.
Laptop cleaners
The surface of the keyboard should be cleaned regularly, at least once a month. You can buy a cleaning kit from specialized stores. It includes a brush, tissue and cleaning fluid. This kit will help you clean your keyboard more thoroughly. If you do not have special button cleaning fluids on hand, use the tools at hand to clean your laptop keyboard.
We offer some of them:
- Diluted isopropyl alcohol. It is the optimal cleaning agent for removing stubborn dirt. Soak a soft cloth with alcohol and gently wipe all keys. Handle the keyboard carefully, do not overdo it with liquid, so that it does not drip between the keys on the contacts.
Important! Acetone and other aggressive substances must not be used, as they can not only erase the keyboard paint, but, worst of all, melt the laptop case. Ethyl alcohol and vodka can also ruin the paint on the buttons.
- Soapy water. Soak a swab or cotton swab in soapy water and gently wipe off any dirt from the buttons. After the procedure, be sure to wipe the keyboard with a dry cloth, as moisture is contraindicated in the device.
Basic rules for the use of cleaning agents
- Use only special liquids, as well as lint-free wipes, which are sold in any computer stores. Users recommend high-quality computer cleaning products from Defender.
- Use special soft brushes to remove dust and dirt between the keys, and it is better to clean the buttons themselves with wipes.
Important! Before cleaning your laptop keyboard at home, unplug it completely and remove the battery.
How to remove dirt from under the keyboard?
Dirt and debris can also collect under the keys and interfere with normal laptop operation. The easiest way to get rid of the trash is to turn the device over and shake out the contents.
For the same purpose, you can use:
- a brush with a long hard bristle;
- hair dryer - lift the laptop and tilt it, blow the keyboard with cold air;
- a household vacuum cleaner using a narrow nozzle;
- a portable can of compressed air - this aerosol is sold in computer stores.
Important! When vacuuming, do not use the vacuum cleaner at full power.
Deep cleaning laptop keyboard
If you want to be sure that no dirt remains in the keyboard, then perform a deep cleaning. You need:
- disassemble the keyboard;
- remove the keys using a screwdriver;
- clean the rubber bands and contacts using a cleaning agent and soft wipes.
Important! All this must be done very carefully, so if you are not sure of your strengths and results, do not take it, but contact the service center. There, specialists will remove the buttons with a special tool without damaging them, and after carrying out the necessary cleaning, they will return everything back.
If you nevertheless decide to thoroughly clean and wash your laptop at home, use the following algorithm:
- Take a picture of the keyboard to return everything to its original place at the end of the work.
- Use a screwdriver to remove the keys. The fastening of the keyboard buttons, although simple, is very weak. Therefore, be careful not to damage the ribbon cable.
- As soon as the keys are detached, use a brush or a special laptop vacuum cleaner to remove the dust (a vacuum cleaner is also suitable for cleaning upholstered furniture).
- Return all keys to their places.
- If after cleaning a couple of keys do not work, and you are sure that you did everything correctly, then replace the keyboard. Most likely, it's not about the dust.
Important! After you have done all the work, check the operation of the device. You may need to devote some more time to it. To do this, we have prepared a selection of ways.
What difficulties can arise in caring for a laptop?
There are times when it is not possible to do with ordinary cleaning of the keyboard. For example, when you flooded your laptop with juice or tea. Here you will have to completely disassemble the keyboard, rinse it with a special solution.
PC keyboard ( personal computer) or laptop needs care.
At the very least, it needs a superficial cleaning - a way to remove dirt without further interfering with the interior of the keyboard.
Use a regular cloth to clean the keyboard.
At home, you can clean the keyboard without the help of a wizard. This will require special computer wipes. They are suitable for daily care of the monitor and keyboard buttons. Daily wiping will remove traces of dust particles from the surface.
You can use Windows tools or third-party utilities to copy ISO files to a disc or USB flash drive.
Debris and dust accumulate in the space between the buttons. Other products are needed to clean this area.
What methods to clean the computer keyboard at home:
- Blowing out debris and dust with a hair dryer. A strong air blowing mode is set on the device. The temperature is set to minimum (cold air mode).
- Suction of fine particles with a vacuum cleaner without a nozzle. This method is effective for weekly dirt removal. Remember to wrap the tube with a soft cloth to avoid damaging the buttons. Do-it-yourself laptop keyboard cleaning is done in the same way.
- Removing stains with an ear stick dipped in rubbing alcohol. Suitable for gently removing dirt and grease between buttons.
Fig. 1 Use an ear stick to clean the keyboard
- Remove excess particles between keys with a knife wrapped in a napkin or paper towel. Prepare a soapy mixture in a container, dampen a towel on a knife and walk through the space between the buttons.
An important condition: this must be done carefully so as not to damage the internal contacts. The towel is lightly pressed with your fingers to prevent liquid from entering the circuit.
WHAT TO DO IF CONTINUED WITH A LIQUID
If the keys do not work due to the fact that water has been spilled on the keyboard, disassembly and thorough cleaning will be required:
- The keyboard is detached, the liquid is gently shaken out of it. For further cleaning, this element must be completely disassembled. The screws on the back are unscrewed. A compact Phillips screwdriver set is suitable for this.
Fig. 2 There are screws on the back that you need to unscrew
- By untwisting and opening the keyboard, you will see a film scheme inside. A grid of contacts connects the buttons. Carefully remove the film so as not to stain the mesh with your fingers.
Fig. 3 Remove the film so as not to stain the mesh with your fingers
- Underneath you will find rubber pads for each button. Where the wire connects is a green board. It is important that no liquid gets on it. Use a dry ear stick to gently pick up any liquid if it gets into it. Set aside.
Fig. 4 If liquid gets on the green board, remove it with an ear stick
- Remove the rubber pads. Remember the location of the colored elements. When assembled, they are returned to their place. Separate the buttons, they are easy to pry off and snap off. A thin metal nail file will help in this matter.
Prepare hot soapy water in a bowl and toss over the keys. Rinse thoroughly, place on newspaper and leave to dry. Do the same with the body. Lay the boards and circuits aside (you cannot wet them)!
Use the washing machine to clean the buttons. Fold into a sock and wash.
If you undertake to clean the computer parts yourself, the manufacturer's warranty does not cover such cases. Proceed with caution. If you are not confident in your abilities, give the job to professionals.
HOW TO HANDLE THE LAPTOP DESIGN
A laptop keyboard is harder than a computer keyboard and is cleaned differently. It is much thinner and is connected inside the case. Daily cleansing care is carried out in the same way. Computer wipes and earplugs with rubbing alcohol are enough to clean your laptop keyboard.
Sometimes, in order to clean your laptop keyboard at home, you may need to disassemble the keys.
How to remove buttons from laptop keyboard:
- Hold the key on one side with your finger so that it does not fly far away.
Fig. 5 Pry the button on the other side with a thin object
- Pry the button on the other side with a thin object (file, screwdriver).
- Loosen the latch carefully.
Figure 6 Unclip the latch
There is a plastic mount under the key. Pasting a button on a laptop keyboard is just as easy. To do this, she returns to the seat, presses down. At the same time, the latch snaps into place.
Spilled liquid is different. Instructions for your actions:
- Unplug the laptop immediately and turn it over.
Fig. 7 Unplug the laptop and turn it over
- Remove the battery. This is not the time to worry about incorrectly completed programs - the delay can be worth buying a new laptop.
Fig. 8 Remove the battery
- Using a thin screwdriver, pry off the tab from the front of the case. She is on top.
Fig. 9 Using a thin screwdriver, pry off the tab from the front of the case
- Unscrew the fastening bolts.
Your laptop keyboard needs regular cleaning to remove dirt, dust and crumbs. A clean keyboard affects the appearance of your laptop and extends its lifespan. However, you must be careful when cleaning it to avoid damaging it.
- small portable vacuum cleaner;
- a tiny brush and other tools that will be covered in the article.
Step 1. Turn off your laptop.
This is the first thing you need to do before you start cleaning your keyboard to prevent the risk of damaging your laptop. Remove USB devices, mouse, and any drives that might be plugged into the laptop.
Step 2. Collection of materials.
To thoroughly clean your keyboard, you will need:
- A cup or container is large enough to hold all the keys on your keyboard.
- Rubbing alcohol.
- Cotton buds.
- Dish soap or any other mild detergent.
- Paper towels.
- Flat screwdriver.
- Towel.
Most of these materials are probably already in your home, but they are very cheap anyway.
Step 3. Turn the laptop upside down, shake it, or lightly tap the back to remove particles that may be lurking in the gaps between the keys.
Step 4. Clean up the buttons.
You can remove them if necessary, but only if you know how to put them back in. First of all, make sure they are removable and easy to change. Then arm yourself with a knife, flathead screwdriver, or something similar. Take extra care when removing them, as fragile plastic joints break easily.
Keep the buttons in a bowl or anywhere else they won't get lost. Buttons such as enter or spacebar are best left. They are large and much more difficult to attach than letters and numbers. To clean them, add dish detergent to warm water and rinse them lightly.
Step 5. Take wet wipes and use them to wipe the touchpad first and then the keyboard area.
You should use a fabric that does not leave lint, such as microfiber rags specially designed for this purpose. Dip it in the solution:
- isopropyl alcohol and warm water;
- detergent for dishes in warm water;
- hydrogen peroxide.
Wipe off excess moisture to prevent it from dripping into the laptop and damaging it, and wipe the top, bottom, and edges of the keyboard.
Important! If you are using a special cleaner, sprinkle it on a cloth and then wipe the keyboard with it. Do not spray it directly onto the laptop.
Step 6. It is important that the keyboard is dry before using the laptop, especially if cleaning with liquid solutions. Leave the lid open. If you are, put them on the table and dry them.
Video - How to remove and clean a key on a laptop keyboard
Alternative keyboard cleaners
Human inventive mind knows no bounds, and since keyboard contamination is not uncommon, people have come up with many alternative remedies, each with its own characteristics.
| Image | Specifications | Price |
|---|---|---|
 | Super Clean GYU is a jelly-like mass that slowly spreads over the keyboard, collecting dust and crumbs. It is actually able to collect some of the debris from the keyboard, but it will not help get rid of the dust and debris that is clogged deep | Up to 300 rubles per package |
 | Portable keyboard vacuum cleaner with brush. Connects to a computer via USB. |
